Insulated shades cut heat loss
Q. I should replace my windows to save energy, but with the bad economy, I just cannot afford more debt. Is installing insulating window shades or curtains a viable option and which types are best?
A. Windows account for a substantial amount of heat loss from a house. This is because a single pane of glass has an insulating value of only about R-1, whereas an insulated wall may be R-17. The window will lose 17 times more heat per square foot than the wall. Also, there is air leakage around windows which further increases heat loss and creates chilly drafts.
Another indirect energy loss from windows, even double-pane ones without low-e (low-emissivity) coatings, is radiant heat loss. Even though the room air is adequately warm for comfort, you feel chilly near the clear cold glass. When someone feels chilly, they often set the furnace thermostat a little higher, making the furnace run longer and using more energy.
The savings from installing insulating shades and/or curtains often provides a much faster payback than expensive replacement windows. Many people still choose replacement windows because of cleaning convenience, less furniture fading, nice appearance, or their old windows are totally shot.
The additional insulating value from indoor window coverings can range from R-1 to R-5, but the insulation is only part of the story. Insulating shades that have edges trapped in vertical side tracks are most effective. This reduces the room air flow around the shade and across the cold glass.
Last fall, I installed Warm Window insulated Window Quilt shades in my home office where I am writing this column. I realize a significant overall savings because I feel much more comfortable in this room. I am able to set the furnace thermostat three degrees lower than before.
These shades use a quilted, multilayered fabric with heat reflective film in the center. This layer reflects the radiant heat back indoors and minimizes air/moisture migration through the fabric. The plastic side tracks stick to the wall opening with double-sticky tape, so they were easy to install. A pull rope is used to roll them up under a matching fabric cover box.
Making Roman shades yourself is another attractive and efficient option. Use as many layers as possible with some type of reflective film for the center layer. The film does not have to be thick to be effective. Many efficient Roman shade kits are available on the Internet.
Another option is a lightweight cellular pleated shade. When it is hanging down over the window, the cells open up to create insulating dead air spaces. Eclipse Curtains makes typical-looking window curtains with a dense weave to block 99 percent of the light, most air migration and provide substantial insulation value.
The following companies offer insulating shades and curtains: Country Curtains, (800) 937-1237, countrycurtains.com; Cozy Curtains, (800) 342-9955, cozycurtains.com; Smith and Noble, (800) 248-8888, smithandnoble.com; Symphony Shades, (877) 966-3678, cellularwindowshades.com; and Warm Co., (800) 234-9276, warmcompany.com.
Q. My house has a stucco exterior. Several years ago, mold started to grow on it. I had it cleaned and painted, but the mold is starting to grow back. How can I keep it from coming back each time?
A. Mold requires moisture, organic nutrients (dirt) and mold spores to grow. If you can remove a few tree limbs to allow sun to reach the wall, the sun's rays can slow the mold growth and the heat will help keep it dry.
Wash down the wall periodically with a cleaner that inhibits mold growth. Some cleaners will not harm landscaping. Make sure the gutters are not leaking so the soil does not stay damp near that house wall.
• Write to James Dulley at 6906 Royalgreen Drive, Cincinnati, OH 45244 or visit dulley.com.