Geothermal heating knocks dollars off your utility bills
Q. I moved into an old house that needs a new heating and cooling system. I have heard installing geothermal heating is a good choice today and for the future. Is this true and how do they work?
Brandon D.
A. Geothermal heating (heat pump) is extremely energy efficient and generally yields the lowest utility bills of any residential system. In effect, they use renewable solar energy from the sun's rays, which get stored in the ground. Geothermal heat pumps also provide the most energy efficient cooling during summer. Some models also can be combined with solar systems.
In the heating mode, a geothermal heat pump can produce up to five dollars worth of heat for each dollar on your electric bills. Unlike standard heat pumps, which lose efficiency and maximum heat output as the outdoor temperature drops, the efficiency and heat output from a geothermal heat pump remains relatively constant.
During summer, a regular heat pump or central air conditioner loses efficiency and cooling output when it is hotter outdoors. Unfortunately, this is when your house requires the greatest cooling capacity. Cooling efficiencies are as high as 30 EER (energy efficiency ratio). A standard heat pump or central air conditioner is typically less than half as efficient.
Another summertime advantage is free hot water when the geothermal heat pump is cooling your house. Instead of exhausting the heat to the outdoor air through outdoor condenser coils, this waste heat is diverted to your water heater. This device is called a desuperheater and it is included as a standard or optional feature on geothermal heat pumps.
A geothermal heat pump operates similarly to a standard heat pump except it exchanges heat with the ground instead of the outdoor air. The temperature of the outdoor air can vary 30 degrees from day to night and more than 100 degrees from the coldest winter night to the hottest summer day. In contrast, the temperature several feet below the ground surface varies relatively little.
In order to capture (winter) the heat energy from the ground or exhaust (summer) the heat during summer, a long pipe is usually buried in the ground. An antifreeze/water solution, running through the pipe, acts as the heat transfer medium. If there is a pond or wells can be dug, this water can run through the heat pump heat exchangers. Many new models use earth-friendly R410A refrigerant instead of freon.
Since no outdoor condenser coils and fans are needed, the entire heat pump and all mechanical components are located in an indoor unit. It operates quietly and, with no outdoor fan or compressor, there is no noise to bother neighbors or your family at night. This also reduces wear and tear from constant exposure to outdoor weather and playing children.
For a copy of Update Bulletin No. 723, a buyer's guide of 2007 geothermal heat pump models listing stages, efficiencies, outputs, features, freon/R410A, cost comparison chart, and ground loop details, send $3 and a business-size, self-addressed, stamped envelope to James Dulley, c/o Daily Herald, 6906 Royalgreen Drive, Cincinnati, OH 45244 or download at www.dulley.com.
Q. You have written several times about various ways to save water. I put a bucket in the shower to catch the water until the temperature is right. I pour it into the toilet tank. Does this make sense?
Georgette O.
A. Much water is wasted down the bathtub drain while the water temperature is being adjusted. I would imagine you catch a gallon each shower. I don't think pouring it in the toilet tank is the best use though.
The toilet tank is already nearly full so much of the water just runs down the overflow tube. Instead, I would use the water in the clothes washing machine, general cleaning tasks or to water the lawn or indoor plants.