Breaking News Bar
posted: 4/6/2014 12:01 AM

Screen tips for the front door

hello
Success - Article sent! close
 
 

Q. I like to have some natural ventilation in the spring and fall and more light from the front door, but I don't like how a screen door looks. What other methods are there to add screening to the door?

A. Bringing fresh air into your house in the spring and fall is refreshing and actually healthy for most people. Indoor air is often much more polluted from synthetic building materials, furniture, carpeting, paint, cleaning chemicals, etc., and less healthy than outdoor air.

Order Reprint Print Article
 
Interested in reusing this article?
Custom reprints are a powerful and strategic way to share your article with customers, employees and prospects.
The YGS Group provides digital and printed reprint services for Daily Herald. Complete the form to the right and a reprint consultant will contact you to discuss how you can reuse this article.
Need more information about reprints? Visit our Reprints Section for more details.

Contact information ( * required )

Success - request sent close

Depending upon your budget, don't write off installing a screen/storm door. There are some attractive, decorative screen doors available, but they cost more than low-cost, flimsy ones you see on sale at home center stores. These high-quality screen/storm doors also increase efficiency and security.

There are several alternative methods to add screening to your front door. One is a retractable screen. I installed a Dreamscreens retractable kit on my own front door about five years ago and it still works well. When the screen is retracted, no one notices it is even installed on the door.

For a single door, the Dreamscreens kit costs about $250. It is not difficult to install a kit yourself, but professional installation is available and typically costs about $100. Some manufacturers sell only through local dealers and not for do-it-yourself installation.

A retractable screen consists of a tall 1.75-inch vertical square box which is attached to the side of the door opening on the outside. The box is made of rust-free aluminum and is available in many common colors.

The durable screening rolls up inside of this box when the screen is retracted. There is a torsion spring inside of the box which pulls the screen in and also keeps it smooth and taut when the screen is closed over the door. A magnetic strip is attached to the screen metal edge strip.

A narrow aluminum channel is mounted on the other side of the door opening. There is a matching magnetic strip in this channel so the screen edge sticks securely to it when the screen is pulled over the door.

Horizontal thin channels are mounted top and bottom in which the screen edges slide. Even though these use very durable screening, look for ones with a reinforcing vinyl strip molded into the top and bottom screen edges to reduce wear. This is where the screen edges slide in the channels.

A lower-cost (about $40) screening option is the removable Bug Off Screen. It has two screen panels which hang from a spring-loaded rod. Adhesive-backed hook-and-loop strips attach the sides to the door frame. Magnetic pieces hold the center edges together. It is easy to open and walk through.

The following companies offer retractable screens: Alco Ventures, (855) 488-7655, www.miragescreensystems.com; Bug Off Screen, (888) 342-5370, www.bugoffscreen.com; Dreamscreens, (888) 757-0929, www.dreamscreens.com; Eclipse Technologies, (877) 532-5477, www.retractablescreen.com; and Phantom Screens, (888) 742-6866, www.phantomscreens.com.

Q. I have trouble getting enough heated air to a back bedroom. I plan to install a fan in that duct to force more air to that room. What is the easiest method to get the fan to switch on and off?

A. Your problem is a common one. Before installing a duct fan, try to adjust all the duct dampers to get more heat in that room. You may have to close the dampers to other rooms quite a lot to feel the effect.

Use a sail switch to get electricity to the duct fan. It installs in the duct near the furnace and is plugged into an electric wall outlet. When the furnace blower starts, the air flow moves the sail which switches on the fan.

• Write to James Dulley at 6906 Royalgreen Drive, Cincinnati, OH 45244 or visit dulley.com.

Share this page
Comments ()
Guidelines: Keep it civil and on topic; no profanity, vulgarity, slurs or personal attacks. People who harass others or joke about tragedies will be blocked. If a comment violates these standards or our terms of service, click the X in the upper right corner of the comment box. To find our more, read our FAQ.