Breaking News Bar
posted: 1/27/2013 5:51 AM

Can Elgin National coffee grinder brew up profits?

Success - Article sent! close
  • This counter top Elgin National coffee grinder is similar to the one in today's question.

    This counter top Elgin National coffee grinder is similar to the one in today's question.
    SHNS photo courtesy Joe Rosson and Helaine Fendelm

By Helaine Fendelman and Joe Rosson

Q. I have a coffee grinder -- it is an Elgin National and is 25 inches tall. It will not grind coffee -- it just falls through. I have had it for 70 years and my father-in-law had it before that. What is its history and value?

A. Normally, we could not answer this question because the picture is so poor. However, Elgin National coffee grinders are well-known, and we were able to find a picture of a similar machine that we could use as an illustration for today's purposes.

Let us state clearly before we go on that we cannot answer questions without good, clear, focused photographs. Therefore, do not write us and expect a reply using word descriptions or by sending photographs that are too small or too fuzzy for us to be able to develop a clear idea of what we are trying to evaluate.

Elgin National coffee grinders were manufactured in Elgin, Ill., along with the famous watches, voting machines, malted milk and miniature trains. The coffee grinders were made by the C.H. Woodruff Foundry, which one source suggests started making coffee grinders in 1889.

This source says this foundry's primary product before the introduction of coffee grinders was school furniture, but another source says it was mainly a maker of bicycles. In either event, over the years, the coffee mills came in a variety of sizes, with the largest being a 68-1/2-inch-tall giant floor model that could grind up to 9 pounds of coffee at a time (the smallest ones were about a foot tall and were for home use).

In 1900, the company became known as Woodruff and Edwards, and this can help collectors date the particular machine they own. The first machines were black or maroon with gilded striping, while later models were painted red or blue and had gold/bronze striping. The top of the hopper was often just a sort of button, but examples can be found with eagle finials, and these are prized by coffee-mill collectors.

We are fairly sure that the machine in today's question is missing its receiver, but it looks like its paint job is at least in moderately good condition. Having its original finial would be a plus, but we cannot see for sure if it is there.

Countertop Elgin National coffee mills such as this one usually sell at auction in the $175-$275 range, depending on the condition, and have an insurance-replacement value in the neighborhood of $350-$600.

• Contact Helaine Fendelman and Joe Rosson at Treasures in Your Attic, P.O. Box 18350, Knoxville, TN 37928.

Get articles sent to your inbox.

Article Comments ()
Guidelines: Keep it civil and on topic; no profanity, vulgarity, slurs or personal attacks. People who harass others or joke about tragedies will be blocked. If a comment violates these standards or our terms of service, click the X in the upper right corner of the comment box. To find our more, read our FAQ.