advertisement

Conant teachers use 3-D technology to make PPE

James B. Conant High School science teacher Dave Torpe and Applied Technology Department Chairman Eric LeBlanc have been occupying their time recently doing what they can to support medical professionals combating the current COVID-19 pandemic.

Due to social distancing, Torpe and LeBlanc have been working on different personal protective equipment (PPE) designs from their homes.

LeBlanc said he was inspired to begin work on this after seeing Conant High School Principal Julie Novak and others packing meals for students across the district.

"You could tell from the photos I saw that she was putting her heart and soul into District 211 families, and it really made me want to do more," he said.

"I learned about a movement through another staff member at Conant, Brigit Cain, about an open source design from a group of doctors in Montana that made and shared online a design for a surgical mask."

Conant High School's Applied Technology Department Chairman Eric LeBlanc displays a 3-D printed mask. Courtesy of District 211

LeBlanc reached out to engineers in the discussion group on the website www.makethemasks.com. After getting permission from school administration, LeBlanc retrieved a couple of the school's 3-D printers and used the pattern from the engineers to begin making masks.

He added that while the masks have not yet been approved by the FDA, there is strong evidence about the effectiveness of this design.

While LeBlanc has been working on masks, Torpe has been working on creating face shields. He said he was able to find a pattern at 3dverkstan.se, and current information on the clinical review can be found at 3dprint.nih.gov/discover/3dpx-013306.

David Torpe, a Conant High School science teacher, demonstrates a face shield he built. Courtesy of District 211

Torpe said he came up with the idea to make the masks after reading about the need in the online 3-D community.

"There were some posts in the 3-D community that had some people designing solutions for medical professionals," he said.

"While I was following this, I was also hearing about shortages of PPE, and how our Applied Tech Department donated some of our unused PPE."

Following a discussion with Conant High School Science Department Chairwoman Sharon McCoy, Torpe began printing PPE equipment that was in demand. He then retrieved some 3-D printers from the school and began using them to print the components needed to assemble the face shields.

Torpe added that each shield takes approximately one hour to print and five minutes to assemble. He added that after looking into the design he decided to use, he found it was one of the more popular designs.

Torpe and LeBlanc said they are engaging students in concept designs and instruction of assembly as part of the students' e-learning experience. The two teachers also are making arrangements to donate the completed projects to local hospitals.

Article Comments
Guidelines: Keep it civil and on topic; no profanity, vulgarity, slurs or personal attacks. People who harass others or joke about tragedies will be blocked. If a comment violates these standards or our terms of service, click the "flag" link in the lower-right corner of the comment box. To find our more, read our FAQ.